3 Fazlı Asenkron Motorun Farklı Çalışma Koşulları Altındaki Tepkisinin Vektör Kontrol Tekniği ile Analizi
Öz
Asenkron motorlar yaygın kullanım alanlarına sahiptir. Tasarımları güvenilir ve ucuz olmasıyla birlikte kontrolü zordur. Bu nedenle kontrol sistemini basitleştirmek amacıyla çeşitli sistemler geliştirilmiştir. Bu sistemlerden birisi de Vektör Kontrol (Alan Yönlendirmeli Kontrol) dür. Bu çalışmada 3 fazlı sincap kafesli bir asenkron motorun doğrudan, kapalı çevrim, vektör kontrol tasarımı Matlab/Simulink ortamında yapılmıştır. Belirlenen sabit bir referans hıza ulaşma durumu, belirli aralıklarla değişen referans hızlara ulaşma durumu, devreye yük alındığı durumda daha önce belirlenmiş referans hıza tekrar ulaşma durumu gibi durumlar incelenmiş ve asenkron motorun referans hızlara rahatlıkla ulaştığı görülmüştür. Tasarımın doğruluğu ve işe yararlığı ispatlanmıştır.
Anahtar Kelimeler
Vektör Kontrol Doğrudan Vektör Kontrol Alan Etkili Kontrol (FOC) 3 Fazlı Sincap Kafesli Asenkron Motor
Kaynakça
- [1] R. Krishnan, Electric Motor Drives, New Jersey, USA: PrenticeHall, 2001, pp. 411-426.
- [2] P. Rakesh, “AC induction motor fundamentals,” Microchip Technology Inc, Arizona, USA, Rep. DS00887A, 2003, pp. 1-24.
- [3] B. S. Naik, “Comparision of direct and indirect vector control of induction motor,” International Journal of New Technologies in Science and Engineering (IJNTSE), vol. 1, no. 1, pp. 110-131, 2014.
- [4] M. P. Kazmierkowski, and H. Kopcke. “Simple control system for current source inverter-fed induction motor drives,” IEEE transactions on industry applications, vol. IA-21, no. 3, pp. 617-623, 1985.
- [5] W. Tao, and Z. Liang, “Simulation of vector control frequency converter of induction motor based on Matlab/Simulink,” 2011 Third International Conference on Measuring Technology and Mechatronics Automation Conference, Shangshai, China, Jan. 2011, pp. 265-268.
- [6] S. S. Aung, and T. N. Htun. “Speed control system of induction motor by using vector control method,” International Journal of New Technologies in Science and Engineering (IJNTSE), vol. 3, no. 5, pp. 2254-2257, 2019.
- [7] S. Goyat, and R. Ahuja. “Speed control of induction motor using vector or field oriented control,” International Journal of Advances in Engineering & Technology, vol. 4, no. 1, pp. 475-482, 2012.
- [8] A. Kumar and T. Ramesh “Direct field oriented control of induction motor drive,” 2015 Second International Conference on Advances in Computing and Communication Engineering, Dehradun, India, May. 2015, pp. 219-223.
- [9] S. N. Vukosavic, and M. R. Stojic. “On-line tuning of the rotor time constant for vector-controlled induction motor in position control applications,” IEEE Transactions on Industrial Electronics, vol. 40, no. 1, pp. 130-138, 1993.
- [10] M. Benhaddadi, K. Yazid, and R. Khaldi. “An effective identification of rotor resistance for induction motor vector control,” IEEE Instrumentation and Measurement Technology Conference Sensing, Processing, Networking. IMTC Proceedings, Ottawa, Ontario, Canada, May, 1997, pp. 339-342.
- [11] Y. Kim, S. Sul, and M. Park. “Speed sensorless vector control of induction motor using extended Kalman filter,” IEEE Transactions on Industry Applications, vol. 30, no. 5, pp. 1225-1233, 1994.
- [12] S. Kim, et al. “Speed-sensorless vector control of an induction motor using neural network speed estimation,” IEEE Transactions on industrial electronics, vol. 48, no. 3, pp. 609-614, 2001.
- [13] A. Hashim, “Speed sensorless vector control of induction motors using rotor flux based model reference adaptive system,” Journal of Engineering and Computer Science (JECS), vol. 16, no. 3, pp. 1-4, 2015.
- [14] I. Benlaloui, et al. “Implementation of a new MRAS speed sensorless vector control of induction machine,” IEEE Transactions on Energy Conversion, vol. 30, no. 2, pp. 588-595, 2014.
Analysis of 3 Phase Asynchronous Motor with Vector Control Technique Under Different Operating Conditions
Öz
Asynchronous motors have wide usage areas. Its designs are reliable and cheap, but control is difficult. Therefore, various systems have been developed to simplify the control system. One of these systems is Vector Control (Field Oriented Control). In this study, the direct, closed loop, vector control design of a 3 phase squirrel cage asynchronous motor was made in Matlab / Simulink environment. The conditions such as reaching a specified fixed reference speed, the situation of reaching the reference speed changing at certain intervals, the situation of reaching the previously determined reference speed when the load is switched on were examined and it was seen that the asynchronous motor reached the reference speeds easily. The accuracy and usefulness of the design has been proven.
Anahtar Kelimeler
Vector Control Direct Vector Control Field Oriented Control (FOC) 3 Phase Squirrel Cage Asynchronous Motor
Kaynakça
- [1] R. Krishnan, Electric Motor Drives, New Jersey, USA: PrenticeHall, 2001, pp. 411-426.
- [2] P. Rakesh, “AC induction motor fundamentals,” Microchip Technology Inc, Arizona, USA, Rep. DS00887A, 2003, pp. 1-24.
- [3] B. S. Naik, “Comparision of direct and indirect vector control of induction motor,” International Journal of New Technologies in Science and Engineering (IJNTSE), vol. 1, no. 1, pp. 110-131, 2014.
- [4] M. P. Kazmierkowski, and H. Kopcke. “Simple control system for current source inverter-fed induction motor drives,” IEEE transactions on industry applications, vol. IA-21, no. 3, pp. 617-623, 1985.
- [5] W. Tao, and Z. Liang, “Simulation of vector control frequency converter of induction motor based on Matlab/Simulink,” 2011 Third International Conference on Measuring Technology and Mechatronics Automation Conference, Shangshai, China, Jan. 2011, pp. 265-268.
- [6] S. S. Aung, and T. N. Htun. “Speed control system of induction motor by using vector control method,” International Journal of New Technologies in Science and Engineering (IJNTSE), vol. 3, no. 5, pp. 2254-2257, 2019.
- [7] S. Goyat, and R. Ahuja. “Speed control of induction motor using vector or field oriented control,” International Journal of Advances in Engineering & Technology, vol. 4, no. 1, pp. 475-482, 2012.
- [8] A. Kumar and T. Ramesh “Direct field oriented control of induction motor drive,” 2015 Second International Conference on Advances in Computing and Communication Engineering, Dehradun, India, May. 2015, pp. 219-223.
- [9] S. N. Vukosavic, and M. R. Stojic. “On-line tuning of the rotor time constant for vector-controlled induction motor in position control applications,” IEEE Transactions on Industrial Electronics, vol. 40, no. 1, pp. 130-138, 1993.
- [10] M. Benhaddadi, K. Yazid, and R. Khaldi. “An effective identification of rotor resistance for induction motor vector control,” IEEE Instrumentation and Measurement Technology Conference Sensing, Processing, Networking. IMTC Proceedings, Ottawa, Ontario, Canada, May, 1997, pp. 339-342.
- [11] Y. Kim, S. Sul, and M. Park. “Speed sensorless vector control of induction motor using extended Kalman filter,” IEEE Transactions on Industry Applications, vol. 30, no. 5, pp. 1225-1233, 1994.
- [12] S. Kim, et al. “Speed-sensorless vector control of an induction motor using neural network speed estimation,” IEEE Transactions on industrial electronics, vol. 48, no. 3, pp. 609-614, 2001.
- [13] A. Hashim, “Speed sensorless vector control of induction motors using rotor flux based model reference adaptive system,” Journal of Engineering and Computer Science (JECS), vol. 16, no. 3, pp. 1-4, 2015.
- [14] I. Benlaloui, et al. “Implementation of a new MRAS speed sensorless vector control of induction machine,” IEEE Transactions on Energy Conversion, vol. 30, no. 2, pp. 588-595, 2014.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Konular | Mühendislik |
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 29 Ekim 2020 |
| Yayımlandığı Sayı | Yıl 2020 Cilt: 8 Sayı: 4 |
